ULTRACOAT SOLVENT BASE
Alcohol based ultra quick drying base coat for wooden floors.
Ultracoat Solvent Base is a solventborne, alcohol
based, quick-drying base coat for wooden floors.
Used in combination with Ultracoat water-based
lacquers, is suitable for sanded and untreated wooden
floors, including most exotic wood species.
• On types of wood with a high content of extracts we
recommend to carry out a preliminary test before
• Not suitable for outdoor application.
• Use only clean containers and tools.
• Do not put leftovers back into the original container.
• Store, transport, and apply the product at a
temperature between +18°C/+25°C.
Preparation of the substrates
Sand wooden floors with coarse and medium – grained
sandpaper and remove all traces of dust with a vacuum
cleaner. Grout cracks and irregularities with Ultracoat
Filler S1 according to the instructions contained in
the product’s relative Technical Data Sheet. Remove
all traces of dust after buffing and apply an even and
homogeneous (80-100 g/sqm) coat of Ultracoat
Solvent Base by roller (Ultracoat Roller T5 or
Ultracoat Roller T10) on the whole floor. After about
15-20 minutes we recommend to buff the surface
with Ultracoat Pad (green) or, proceed directly to the
application of a first coat of an Ultracoat finish.
For the finishing cycles proceed according to the
instructions contained in the product’s relative TDS.