Welcome visitor you can login or create an account.

Shopping Cart

0 item(s) - $0.00
Your shopping cart is empty!
Manufacturers
Shop by Brand

Intergrain Natural Stain 4L

Intergrain Natural Stain 4L
Intergrain Natural Stain 4L Intergrain Natural Stain 4L
Brand: Intergrain
Product Code: COFWINNATC4
Reward Points: 0
Availability: In Stock
Price: $100.10
Ex Tax: $91.00

Available Options


* litres:

* Intergrain Natural Stain Colour Options:







Videos

*Some colour options require a 48hour lead time. Please contact us for further information.

Semi transparent, water based stain with outstanding durability. This fast-drying, low odour finish protects timber from the destructive effects of weathering and provides excellent tannin blocking and resistance to damage from mould and UV rays. Ideal for enhancing timber colour. changing the colour of treated pine or reviving faded timber. NaturalStain can be overcoated with UltraClear Exterior for a gloss or a satin finish, and for extra protection.

NaturalStain does not penetrate as deeply into the timber as Nature’s Timber Oil or UltraDeck. It has more colour than a decking oil and therefore can be used to change the colour of the timber while still allowing the natural grain of the timber to show through. NaturalStain will last longer than UltraDeck, and will last at least three times longer than a traditional decking oil. For example, a light timber, such as treated pine can be stained to a Jarrah colour. It can also be used to enhance the natural timber colour or stain old, grey, weathered timber that has lost all natural colour. For example, NaturalStain Merbau can be used on a new merbau deck for a rich, deep brown finish or an old, weathered merbau deck to add colour.
 

Where To Use
On all exterior timber including decking, weatherboards, window frames, shutters, garage doors, garden furniture, walkways and fences. Also suitable for use on HardiPlank™ and similar cement based and composite timber cladding. Gloss Level
Matt to Low Sheen.

Preparation
Preparation is the key to long lasting, professional looking results. Click here for how to prepare the timber surface before coating.

 

Apply With
Brush, spray or applicator (use an applicator for dressed timber only).

 

No. of Coats Required
Two coats. Three coats will be required in extreme conditions such as full sun exposure, around pools and in humid areas, and may be required on porous timbers.
Note: The first coat on porous and rough sawn timbers will penetrate further and require more stain than the second coat. If using more than one can of NaturalStain ensure that you mix them together to ensure that the colour is consistent.

 

Recoat Time
Allow 2–3 hours drying between coats at 25°C.
Overcoating: Allow minimum 4 hours drying at 25°C before coating with UltraClear Exterior.

 

Drying/curing Time
Touch Dry: 1 hour at 25°C and 50% humidity.
Decking can be walked on after 24 hours. Full curing 7 days

 

Coverage Rate m2/L
6-12 square metres per litre depending on the porosity of the timber.

 

Sand Between Coats
If necessary, sand lightly between coats to remove any raised grain.

 

Clean Up With
Water.

 

Packaging Sizes
1, 4 and 10L.
 

 


Please refer to the instructions provided on the Intergrain Timber Finish container before commencing your project

 

 

 

 

 
Videos
Intergrain Natural Stain 4L
Videos

Write a review

Related Products

payment methods